Thursday, January 31, 2008
Tuesday, January 29, 2008
Prototype 2
Original design of the conveyor belt system
- 2 pulleys (1 on the top, 1 at the bottom)
- 2 gears (both in the middle)
- Belt with small units attached (for holding the rods)
Problem encountered
- The belt cannot turn efficiently with the gears in the middle
- The glue is not strong enough to hold the small units on the belt firmly
Solution
- The gears should be placed at the top & the bottom in the next protoype
- Replace the belt with a chain that includes teeth
Will replace the screws with something else in the next model
- 2 pulleys (1 on the top, 1 at the bottom)
- 2 gears (both in the middle)
- Belt with small units attached (for holding the rods)
Problem encountered
- The belt cannot turn efficiently with the gears in the middle
- The glue is not strong enough to hold the small units on the belt firmly
Solution
- The gears should be placed at the top & the bottom in the next protoype
- Replace the belt with a chain that includes teeth
Will replace the screws with something else in the next model
Sunday, January 27, 2008
Mechanical parts - Turning the fabric roll
Mechanical parts - Hanging the fabric roll
Mechanical parts - Conveyor belt
Overall Fabric System
Single Unit
Tuesday, January 22, 2008
Friday, January 18, 2008
Ex 2
Fabric Storage System
The fabric storage system is aimed for fabric retail shops in Hong Kong, where it is always an inconvenient and painstaking process to retrieve and return heavy rolls fabric that are often piled on the shelves or lined up in rows against the wall. In the system, rolls of fabric are attached onto a conveyor belt system that is on the wall. Users can let the rolls run until they choose one they want to see and retrieve it by automation.






Thursday, January 17, 2008
Wednesday, January 16, 2008
Tuesday, January 15, 2008
Subscribe to:
Posts (Atom)








































